Dolby® Conference Phone Configuration Parameters

1.0Configuration Parameters

The configuration parameters are listed in this section in alphabetical order.Note: Changes to the parameters ending with '*' will cause a phone reboot.

1.1Features

These parameters define the features on the Dolby Conference Phone.

Table 1-1Features Parameters

ParameterDescriptionPermitted ValuesDefaultProvisionableWeb UI Location
Features.OperationMode*Device operation mode
DUALMODE
IPPBXONLYMODE
CONFONLYMODE
IPPBXONLYMODEYes Settings / Features / Operation Mode
Features.RecentCallsEnabledFlag to determine whether to enable the recent calls feature true, false trueYes Settings / Features / Enable Recent Calls
Features.UserFeedback.EnabledFlag to determine whether to show the call quality feedback dialog at the end of a call true, false trueYes Settings / Features / User Feedback / Enable the Call Quality Feedback dialog
Features.UserFeedback.HotlineUser feedback hotline number15-character string Yes Settings / Features / User Feedback / User Feedback Hotline
Features.PersonalMode.EnabledBy setting the conference phone as personal, the user configured for the phone can save their chairperson passcode and easily start meetings. true, false falseYes Settings / Features / Personal Mode / Set phone for personal use
Features.PersonalMode.SecuredAccessEnabledPersonal PIN authentication required. Only applicable when personal mode is enabled. true, false trueYes Settings / Features / Personal Mode / Personal PIN authenticate required

1.2Preferences

These parameters define the user preferences on the Dolby Conference Phone.

Table 1-2Preferences Parameters

ParameterDescriptionPermitted ValuesDefaultProvisionableWeb UI Location
Preferences.DndEnabledFlag to determine whether to enable the Do Not Disturb feature true, false falseYes Settings / User Preferences / Do Not Disturb
Preferences.AutoAnswerEnabledFlag to determine whether to enable the Auto-Answer feature true, false falseYes Settings / User Preferences / Auto-Answer
Preferences.ForwardAllNumberNumber where all calls are forwarded to15-character string Yes Settings / User Preferences / Call Forward All Number
Preferences.ForwardBusyNumberNumber where a call is forwarded when the user is busy15-character string Yes Settings / User Preferences / Call Forward Busy Number
Preferences.ForwardNoAnswerNumberNumber where a call is forwarded when the user does not answer the phone15-character string Yes Settings / User Preferences / Call Forward No Answer Number
Preferences.SpeechVolumeVolume of speaker audio1 to 2010Yes Settings / User Preferences / Speech Volume
Preferences.RingerVolumeVolume of ringer1 to 2010Yes Settings / User Preferences / Ringer Volume
Preferences.BrightnessLevelBrightness level of backlight0 to 10080Yes Settings / User Preferences / Brightness Level
Preferences.Localization.TimezoneTime zone where the device is located. For complete list of possible values, go to http://www.iana.org/time-zones
GMT-12
Pacific/Samoa
Pacific/Honolulu
America/Anchorage
America/Los_Angeles
America/Denver
America/Chicago
America/New_York
America/Caracas
America/St_Johns
America/Argentina/Buenos_Aires
Atlantic/South_Georgia
Atlantic/Azores
Europe/London
Europe/Paris
Africa/Johannesburg
Asia/Baghdad
Asia/Tehran
Asia/Muscat
Asia/Kabul
Asia/Karachi
Asia/Kolkata
Asia/Kathmandu
Asia/Dhaka
Asia/Bangkok
Asia/Singapore
Asia/Tokyo
Australia/Adelaide
Australia/Sydney
Asia/Magadan
Pacific/Auckland
Europe/LondonYes Settings / User Preferences / Localization / Time Zone
Preferences.Localization.TimeFormatTime Format
h:mm ap
h:mm
h:mm apYes Settings / User Preferences / Localization / Time Format
Preferences.Localization.DateFormatDate Format
dd/MM/yy
d MMMM, yyyy
MMMM d, yyyy
MM/dd/yy
d MMM, yy
MMM d, yy
d MMMM yyyy
dd.MM.yy
d. MMMM yyyy
Spanish/Portuguese long
Chinese long
yyyy/MM/dd
yy. M. d.
Korean long
MMMM d, yyyyNo Settings / User Preferences / Localization / Date Format
Preferences.Localization.LanguageLanguage selection
en
fr
it
de
es
pt
pt_BR
zh-Hant
zh-Hans
ja
ko
enYes Settings / User Preferences / Localization / Language

1.3Network

These parameters specify the network connections for the Dolby Conference Phone.

Table 1-3Network Parameters

ParameterDescriptionPermitted ValuesDefaultProvisionableWeb UI Location
Network.DHCP*Flag to determine whether to enable automatic network configuration using DHCP. If true, the phone will come up requesting an IP address from the DHCP server. If false, you will manually configure the IP address. true, false trueNo Settings / Network / DHCP Network Configuration Method
Network.IpAddress*IP address of the phone. Note: Enabled only when Network.DHCP is set to false.15-character string No Settings / Network / IP Address
Network.Subnet*Subnet mask of the network interface. Note: Enabled only when Network.DHCP is set to false.15-character string No Settings / Network / Subnetmask
Network.DefaultGatewayDefault gateway for IP Routing. Note: Enabled only when Network.DHCP is set to false.15-character string No Settings / Network / Default Gateway
Network.DomainNameNetwork domain name
DOMAIN
No Settings / Network / Domain Name
Network.DNS1Primary DNS server IP address. Note: Enabled only when Network.DHCP is set to false.15-character string No Settings / Network / DNS Server Address
Network.DNS2Secondary DNS server IP address. Note: Enabled only when Network.DHCP is set to false.15-character string No Settings / Network / Alternative DNS Server Address
Network.Eapol.Identity*IEEE 802.1X user identity64-character string No Settings / Network / IEEE 802.1X / IEEE 802.1X User Identity
Network.Eapol.Password*IEEE 802.1X password64-character string No Settings / Network / IEEE 802.1X / IEEE 802.1X Password
Network.Dhcp.VlanIdOptionTag*DHCP option tag of VLAN ID. Note: Enabled only when Network.DHCP is set to true.128 to 207132No Settings / Network / DHCP / DHCP Option Tag of VLAN ID
Network.Ntp.Server1Primary NTP server IP address
DOMAIN
time.nist.govYes Settings / Network / NTP / Primary NTP Server Address
Network.Ntp.Server2Secondary NTP server IP address
DOMAIN
pool.ntp.orgYes Settings / Network / NTP / Secondary NTP Server Address
Network.Vlan.ManualVlanId*User configured VLAN ID. When DHCP does not provide the VLAN ID, this value is used.0 to 40950No Settings / Network / Virtual LAN / Manual VLAN ID
Network.QoS.DscpVoice*Network layer DSCP priority of voice channels0 to 6346Yes Settings / Network / Quality Of Service / DSCP Priority of Voice Channels
Network.QoS.DscpSignaling*Network layer DSCP priority of signaling channels0 to 6340Yes Settings / Network / Quality Of Service / DSCP Priority of Signaling Channels
Network.QoS.CosVoice*Link layer priority of voice channels0 to 75Yes Settings / Network / Quality Of Service / Link Layer Priority of Voice Channels
Network.QoS.CosSignaling*Link layer priority of signaling channels0 to 73Yes Settings / Network / Quality Of Service / Link Layer Priority of Signaling Channels
Network.Proxy.AutoDiscoverEnable WPAD - Web Proxy Auto-Discovery Protocol true, false falseYes Settings / Network / Proxy / Enable WPAD
Network.Proxy.PacUrlPAC Configuration URL
ASCII
Yes Settings / Network / Proxy / PAC Configuration URL
Network.Proxy.UserNameProxy server login name64-character string Yes Settings / Network / Proxy / Proxy Server Login Name
Network.Proxy.PasswordProxy server login password64-character string Yes Settings / Network / Proxy / Proxy Server Login Password
Network.Services.LLDPEnabled*Enable LLDP true, false trueNo Settings / Network / Services / Enable LLDP
Network.Services.SSHEnabledEnable SSH server true, false trueYes Settings / Network / Services / Enable SSH Server
Network.Services.WebServerModeEnable web server
DISABLED
ENABLED
HTTPSONLY
ENABLEDYes Settings / Network / Services / Enable Web Server

1.4Provisioning

These parameters specify the connection to the provisioning server.

Table 1-4Provisioning Parameters

ParameterDescriptionPermitted ValuesDefaultProvisionableWeb UI Location
Provisioning.Server.Static*Flag to determine whether to enable static configuration of the provisioning server address. If true, the provisioning server is accessible through Provisioning.Server.Address. If false, the provisioning server information is passed to the phone over DHCP in option 66. true, false falseNo Settings / Provisioning / Server / Static Server Configuration
Provisioning.Server.TypeProvisioning server type
FTP
HTTP
HTTPS
FTPNo Settings / Provisioning / Server / Provisioning Server Type
Provisioning.Server.AddressProvisioning server address. Note: Enabled only when Provisioning.Server.Static is set to true.256-character string No Settings / Provisioning / Server / Provisioning Server Address
Provisioning.Server.UsernameProvisioning server login name. For Provisioning.Server.Type=ftp, this is the user name for logging into the FTP server.64-character string No Settings / Provisioning / Server / Provisioning Server Login Name
Provisioning.Server.PasswordProvisioning server login password. For Provisioning.Server.Type=ftp, this is the password for logging into the FTP server.64-character string No Settings / Provisioning / Server / Provisioning Server Login Password
Provisioning.Server.UploadDirDirectory on provisioning server for uploaded files512-character string Yes Settings / Provisioning / Server / Upload Directory
Provisioning.Scheduled.EnableFlag to determine if scheduled provisioning is enabled true, false falseYes Settings / Provisioning / Scheduled Provisioning / Enable scheduled provisioning
Provisioning.Scheduled.StartTimeScheduled reprovisioning start time0 to 230Yes Settings / Provisioning / Scheduled Provisioning / Scheduled reprovisioning start time (hour)
Provisioning.Scheduled.DurationScheduled reprovisioning interval duration, reprovisioning will happen randomly within this time frame from the start time5 to 12060Yes Settings / Provisioning / Scheduled Provisioning / Scheduled reprovisioning interval duration (minutes)

1.5Sip

These parameters specify the connection to the call server (or SIP server).

Table 1-5Sip Parameters

ParameterDescriptionPermitted ValuesDefaultProvisionableWeb UI Location
Sip.Account.DisplayNameSIP user display name64-character string Dolby VoiceYes Settings / IP PBX Settings / Account / Display Name
Sip.Account.UserNameExtension Number/Address (also SIP user name)64-character string Yes Settings / IP PBX Settings / Account / Extension Number/Address
Sip.Account.DisplayNumberThis is the number that will be displayed on the home screen, if not configured then extension number will be displayed instead.16-character string Yes Settings / IP PBX Settings / Account / Display Number
Sip.Account.TransportTypePreferred transport to communicate with PBX Server
UDP
TCP
TLS
TCPYes Settings / IP PBX Settings / Account / Transport Type
Sip.Account.SelfPort*Bind port used for SIP transport. TLS port will be default to UDP/TCP port incremented by 1500 to 99995060Yes Settings / IP PBX Settings / Account / Transport Port
Sip.Pbx.DomainThe SIP domain is the domain name of the IP PBX service the device is registering with. It should be configured if the device connects to the IP PBX service through one or more SIP Proxies. Leave blank if the device directly connects to the SIP server without going through a SIP proxy.64-character string Yes Settings / IP PBX Settings / Server / SIP Domain Name
Sip.Pbx.OutboundProxy1Primary call server or outbound proxy address
DOMAIN
Yes Settings / IP PBX Settings / Server / Primary Call Server/Outbound Proxy
Sip.Pbx.OutboundProxy1PortPrimary call server/Outbound proxy port500 to 655345060Yes Settings / IP PBX Settings / Server / Primary Server/Outbound Proxy Port
Sip.Pbx.OutboundProxy2Secondary call server or outbound proxy address
DOMAIN
Yes Settings / IP PBX Settings / Server / Secondary Call Server/Outbound Proxy
Sip.Pbx.OutboundProxy2PortSecondary SIP server/Outbound Proxy port500 to 655345060Yes Settings / IP PBX Settings / Server / Secondary Server/Outbound Proxy Port
Sip.Pbx.SipUriSchemeSIP URI Scheme. Possible values are true - sip and false - sips true, false trueYes Settings / IP PBX Settings / Server / SIP URI Scheme
Sip.Pbx.OnlyAcceptCallServerEventsWhether the device will only accept SIP events from the Call Server true, false trueYes Settings / IP PBX Settings / Server / Only accept call server SIP events
Sip.Pbx.RegistrationTimeoutSIP server registration timeout (seconds)5 to 6032Yes Settings / IP PBX Settings / Server / SIP Registration Timeout (seconds)
Sip.Pbx.CodecsPBX Codec list128-character string G711U,G711A,G722,iLBCYes Settings / IP PBX Settings / Server / PBX Codec List
Sip.Pbx.InBandDTMFIn-band DTMF true, false falseYes Settings / IP PBX Settings / Server / In band DTMF
Sip.Credential.NameUser credential name64-character string Yes Settings / IP PBX Settings / Credential / User Credential Name
Sip.Credential.PasswordUser credential password16-character string Yes Settings / IP PBX Settings / Credential / User Credential Password
Sip.Credential.RealmServer realm32-character string *Yes Settings / IP PBX Settings / Credential / Server Realm

1.6Dvms

These parameters specify the connection to the BT MeetMe with Dolby Voice conferencing service.

Table 1-6Dvms Parameters

ParameterDescriptionPermitted ValuesDefaultProvisionableWeb UI Location
Dvms.InactiveTalkerTimeoutTimeout to removing the active talker flag from the talker's list10 to 6553460Yes Settings / Dolby Voice Conferencing Service / Inactive Talker Timeout (seconds)
Dvms.HostPasscodeChairperson passcode to quickly start meetings. Only applicable when personal mode is enabled.16-character string No Settings / Dolby Voice Conferencing Service / Host passcode
Dvms.Location.CountryCodeDefault country code for dial-out4-character string 1Yes Settings / Dolby Voice Conferencing Service / Location / Country code
Dvms.Server.SIPRegistrationRequiredFlag to determine if SIP registration required with Dolby Voice Conferencing Server true, false falseYes Settings / Dolby Voice Conferencing Service / Server / SIP Registration Required
Dvms.Server.AddressDolby Voice server IP address or domain
URL
https://my.webjoin.com/dolby/ws/rest/callcontrolYes Settings / Dolby Voice Conferencing Service / Server / Dolby Voice Conferencing Server Address
Dvms.Server.CodecDolby Voice Conference Codec.32-character string 9;G722;8000Yes Settings / Dolby Voice Conferencing Service / Server / Codec
Dvms.Server.RegistrationPIN*Dolby Voice Registration PIN
ASCII
Yes Settings / Dolby Voice Conferencing Service / Server / Dolby Voice Conferencing Server Registration PIN
Dvms.Server.LogALineEnable/Disable conference service logging true, false trueYes Settings / Dolby Voice Conferencing Service / Server / Enable Service Logging
Dvms.Proxy.AddressDolby Voice Conference Proxy Address
URL
Yes Settings / Dolby Voice Conferencing Service / Proxy / Proxy Address
Dvms.Proxy.PortDolby Voice Conference Proxy Port1 to 655348080Yes Settings / Dolby Voice Conferencing Service / Proxy / Proxy Port
Dvms.Proxy.UserDolby Voice Conference Proxy User32-character string Yes Settings / Dolby Voice Conferencing Service / Proxy / Proxy User
Dvms.Proxy.PasswordDolby Voice Conference Proxy Password16-character string Yes Settings / Dolby Voice Conferencing Service / Proxy / Proxy Password

1.7Directory

These parameters define the directories that are stored on the phone. This includes the LDAP definitions. The LDAP parameters specifies the location of the corporate directory\'s LDAP server, the LDAP attributes, and other settings.

Table 1-7Directory Parameters

ParameterDescriptionPermitted ValuesDefaultProvisionableWeb UI Location
Directory.Ldap.URIListComma-separated list of LDAP server URIs (ldap://xxx[,ldap://yyy])128-character string Yes Settings / Corporate Directory / LDAP / Server URI(s)
Directory.Ldap.LoginNameName used to login into the LDAP server(s)256-character string Yes Settings / Corporate Directory / LDAP / User Name
Directory.Ldap.PasswordPassword used to login into the LDAP server(s)32-character string Yes Settings / Corporate Directory / LDAP / Password
Directory.Ldap.SecureConnectionFlag to determine whether to use a secure connection to the LDAP server true, false trueYes Settings / Corporate Directory / LDAP / Secure Connection
Directory.Ldap.BaseDNBase domain name for the search. For example, "dc=dolby,dc=com"64-character string Yes Settings / Corporate Directory / LDAP / Base DN
Directory.Ldap.SearchFilterLDAP search filter, where %1 is a placeholder for the search keyword256-character string (&(objectCategory=person)(|(sn=%1*)(givenName=%1*))(!(msExchHideFromAddressLists=TRUE)))Yes Settings / Corporate Directory / LDAP / Search Filter
Directory.Ldap.SearchScopeSearch depth, where 0=base, 1=one level down, and 2=sub-tree0 to 22Yes Settings / Corporate Directory / LDAP / Search Depth
Directory.Ldap.SearchTimeoutSearch timeout (seconds)0 to 6015Yes Settings / Corporate Directory / LDAP / Search Timeout (seconds)
Directory.Ldap.SearchLimitMaximum number of search results0 to 1000200Yes Settings / Corporate Directory / LDAP / Maximum Search Results
Directory.Ldap.AttrFirstNameName of the attribute corresponding to the first name in the LDAP schema32-character string givenNameYes Settings / Corporate Directory / LDAP / First Name Attribute Name
Directory.Ldap.AttrLastNameName of the attribute corresponding to the last name in the LDAP schema32-character string snYes Settings / Corporate Directory / LDAP / Last Name Attribute Name
Directory.Ldap.AttrNumberName of the attribute corresponding to the phone number in the LDAP schema32-character string telephoneNumberYes Settings / Corporate Directory / LDAP / Phone Number Attribute Name
Directory.Ldap.AttrUUIDName of the attribute corresponding to the unique user ID in the LDAP schema32-character string uidNumberYes Settings / Corporate Directory / LDAP / UUID Attribute Name
Directory.Ldap.AttrMailName of the attribute corresponding to the e-mail address in the LDAP schema32-character string mailYes Settings / Corporate Directory / LDAP / E-Mail Attribute Name

1.8Logging

These parameters specify what information is logged and where it is logged. The level parameters specify the logging levels written to the log file. The remote syslog parameters specify the connection to syslog.

Table 1-8Logging Parameters

ParameterDescriptionPermitted ValuesDefaultProvisionableWeb UI Location
Logging.Upload.EnableFlag to determine if upload of log files is enabled true, false falseYes Settings / Logging / Upload Logs / Enable logs uploading
Logging.Upload.IntervalInterval between logs uploads in minutes1 to 14405Yes Settings / Logging / Upload Logs / Log files upload interval
Logging.RemoteSyslog.EnableFlag to determine if logging to syslog server enabled if syslog server is configured true, false falseYes Settings / Logging / Syslog Service / Enable Syslog
Logging.RemoteSyslog.AddressSyslog server IP address15-character string Yes Settings / Logging / Syslog Service / Syslog Server IP Address
Logging.Console.EnableOutput*Flag to determine if sending of logging messages to active console(s) is enabled true, false falseYes Settings / Logging / Console Logging / Enable Console Logging
Logging.Level.EvsEVS (Event Service) is an internal communication dispatch service that allows software modules to talk to each other. In the log file, the module name is EVS.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / EVS Module
Logging.Level.ACMEACME SDK is a 3rd party library that handles tunneling connection with the conferencing service. In the log file, the module name is ACME.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / ACME SDK Module
Logging.Level.DVTSCDVTSC SDK is a Dolby library that handles tunneling connection with the conferencing service. In the log file, the module name is DVTS.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / DVTSC SDK Module
Logging.Level.SipSIP Communication module, which handles all telephony and conferencing service session negotiation signaling. In the log file, the module name is SIP.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / SIP Module
Logging.Level.CcapiConference Control API, which handles conferencing service signaling, such as roster list, active speaker, device registration, etc. In the log file, the module name is CCAPI.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / CCAPI Module
Logging.Level.ApiAPS API is an application programming interface that is used by the Embedded UI and Web UI. In the log file, the module name is API.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / API Module
Logging.Level.CfgConfiguration manager, handles the storage, dispatch of the configuration parameters. In the log file, the module name is CFG.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / CFG Module
Logging.Level.AuthAuthentication module handles user login from the Web UI as well as the SSH shell. In the log file, the module name is AUTH.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / AUTH Module
Logging.Level.WebWeb FastCGI module handles the device Web UI requests for device control and diagnostics. In the log file, the module name is WEB.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / WEB Module
Logging.Level.LdpLDAP (Lightweight Directory Access Protocol) handles the search request to the corporate LDAP server. In the log file, the module name is LDP.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / LDAP Module
Logging.Level.NetNetwork service module handles network configuration, such as VLAN, DHCP, LLDP, etc. In the log file the module name is NET.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / NET Module
Logging.Level.PvsProvisioning service module handles device interactions with the Provisioning Server, the Provisioning Server is a centralized file server that helps to bulk configure the devices and collect logs. In the log file, the module name is PVS.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / Provisioning Module
Logging.Level.ShlShell service handles the SSH shell. In the log file, the module name is SHL.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / Shell Module
Logging.Level.UpdUpdate service handles the software upgrade on the device. In the log file, the module name is UPD.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / Update Module
Logging.Level.DevDevice Manager handles the device hardware related tasks. In the log file, the module name is DEV.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / Device Manager Module
Logging.Level.CallLogCall Log handles the recent call service, records the calls placed, received and missed on the device. In the log file, the module name is CDR.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / CALLLOG Module
Logging.Level.UIEmbedded UI User interface module. In the log file, the module name is UI.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / UI Module
Logging.Level.SecuritySecurity module handles the certificate management of the device. In the log file, the module name is SEC.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / Security Module
Logging.Level.CdspDSP (Digital Signal Processor) handles audio processing. In the log file, the module name is CDSP.
NONE
EMERGENCY
ALERT
CRITICAL
ERROR
WARNING
NOTICE
INFO
DEBUG
DEBUG1
INFOYes Settings / Logging / Log Levels / Cdsp Module
Logging.Audio.ModeAudio module logging level. Possible options are Disabled, Statistics, Diagnostic)
DISABLED
STATISTICS
DIAGNOSTIC
DISABLEDYes Settings / Logging / Audio / Audio Logging Level
Logging.Audio.BufferSizeAudio logging buffer size in kB. Possible values range from 4096 to 163844096 to 1638416384Yes Settings / Logging / Audio / Audio Logging Total Buffer Size
Logging.Audio.EchoRefInputEnabledFlag to determine if logging of echo reference input is enabled true, false falseYes Settings / Logging / Audio / Echo Reference Input
Logging.Audio.EchoRefOutputEnabledFlag to determine if logging of echo reference output is enabled true, false falseYes Settings / Logging / Audio / Echo Reference Output
Logging.Audio.JitterInputEnabledFlag to determine if logging of jitter buffer input is enabled true, false falseYes Settings / Logging / Audio / Jitter Buffer Input
Logging.Audio.JitterOutputEnabledFlag to determine if logging of jitter buffer output is enabled true, false falseYes Settings / Logging / Audio / Jitter Buffer Output

1.10Authentication

This parameter defines the authentication parameters for the phone.

Table 1-10Authentication Parameters

ParameterDescriptionPermitted ValuesDefaultProvisionableWeb UI Location
Authentication.Local.AdminAdministrative password9-character string 1739Yes Settings / Authentication / Local Account / Administrative Password
Authentication.Local.SessionTimeoutDefault session timeout (seconds)0 to 1200180Yes Settings / Authentication / Local Account / Default Session Timeout (seconds)
Authentication.Local.SessionPurgeTimeThe expired sessions record will be purged from internal sessions list after this many seconds0 to 1200600Yes Settings / Authentication / Local Account / Expired Sessions Purged Time (seconds)
Authentication.Local.AccessPinPhone access PIN. Only applicable when secured access is enabled.4-character string No Settings / Authentication / Local Account / Phone access PIN
Authentication.Local.AutoLockDurationDuration of auto-lock timeout. Only applicable when secured access is enabled.
5_MINUTES
20_MINUTES
1_HOUR
2_HOURS
4_HOURS
8_HOURS
1_HOURYes Settings / Authentication / Local Account / Autolock timeout duration