Dolby® Conference Phone Shell Parameters

1.0Shell Service Commands

Shell Service commands are generated from an XML format description of the command tree syntax. It can include localized command help, function calls, and diagnostic tests.

Table 1.1 system Shell Commands

CommandParameter(s)Description
system clearcorefilesclearcorefilesRemove core generated.
system checkcorefilescheckcorefilesCheck for core files generated.
system clearcallsclearcallsClear recent calls list.
system rebootrebootReboot the device.
system rmcalibrationrmcalibrationRemove touchscreen calibration data.
system pingIp address of test hostTest reachability of network host.
system ldapsearchSearch entry.Search for entries in LDAP and local directory.
system tracerouteIp address of hostTrace route to network host.
system nslookupIp address of hostFetch domain name or IP address from DNS
system provisionprovisionRestart provisioning
system deactivateBTServicedeactivateBTServiceDeactivate the BT Service.
system lldplldpShow LLDP neighbors
system messagesDump number of lines of syslog messagesDump syslog messages
system netstatnetstatDisplay all network sockets

Table 1.2 test Shell Commands

CommandParameter(s)Description
test audio tonestonesplay tones
test audio tonegen_starttonegen_startstart tone generator
test audio tonegen_stoptonegen_stopstop tone generator
test audio ringerringerplay device ringtone
test audio micmicstart mic capture
test led redred
test led blueblue
test led greengreen
test lcdtest startstartstart test
test lcdtest stopstopstop test
test brightnessvalid range [0 - 100]change LCD brightness
test keypadtesttimeout in secondsTest keypad.
test bluetoothtest startstartstart test
test bluetoothtest stopstopstop test

Table 1.3 auth Shell Commands

CommandParameter(s)Description
auth statusstatusShows authentication service status
auth expireAllexpireAllRequest to expire all active sessions

Table 1.4 show Shell Commands

CommandParameter(s)Description
show versionversionShows version
show memorymemoryDisplay memory usage information.
show cpuloadcpuloadDisplay CPU usage information.
show networknetworkDisplay network information.
show datedateDisplay date.
show callcallDisplay information about call state.
show uptimeuptimeDisplay information about System uptime.
show diskdiskDisplay information about disk state.
show callservercallserverCheck for call server registration.
show sysloadsysloadShow all system load information.
show dspstatedspstateShow DSP state.
show configuration allallShow all config params
show configuration runningrunningShows modified configuration
show configuration Features.OperationModeFeatures.OperationModeDevice operation mode
show configuration Features.RecentCallsEnabledFeatures.RecentCallsEnabledFlag to determine whether to enable the recent calls feature
show configuration Features.UserFeedback.EnabledFeatures.UserFeedback.EnabledFlag to determine whether to show the call quality feedback dialog at the end of a call
show configuration Features.UserFeedback.HotlineFeatures.UserFeedback.HotlineUser feedback hotline number
show configuration Preferences.DndEnabledPreferences.DndEnabledFlag to determine whether to enable the Do Not Disturb feature
show configuration Preferences.AutoAnswerEnabledPreferences.AutoAnswerEnabledFlag to determine whether to enable the Auto-Answer feature
show configuration Preferences.ForwardAllNumberPreferences.ForwardAllNumberNumber where all calls are forwarded to
show configuration Preferences.ForwardBusyNumberPreferences.ForwardBusyNumberNumber where a call is forwarded when the user is busy
show configuration Preferences.ForwardNoAnswerNumberPreferences.ForwardNoAnswerNumberNumber where a call is forwarded when the user does not answer the phone
show configuration Preferences.SpeechVolumePreferences.SpeechVolumeVolume of speaker audio
show configuration Preferences.RingerVolumePreferences.RingerVolumeVolume of ringer
show configuration Preferences.BrightnessLevelPreferences.BrightnessLevelBrightness level of backlight
show configuration Preferences.Localization.TimezonePreferences.Localization.TimezoneTime zone where the device is located. For complete list of possible values, go to http://www.iana.org/time-zones
show configuration Preferences.Localization.TimeFormatPreferences.Localization.TimeFormatTime Format
show configuration Preferences.Localization.DateFormatPreferences.Localization.DateFormatDate Format
show configuration Network.DHCPNetwork.DHCPFlag to determine whether to enable automatic network configuration using DHCP. If true, the phone will come up requesting an IP address from the DHCP server. If false, you will manually configure the IP address.
show configuration Network.IpAddressNetwork.IpAddressIP address of the phone. Note: Enabled only when Network.DHCP is set to false.
show configuration Network.SubnetNetwork.SubnetSubnet mask of the network interface. Note: Enabled only when Network.DHCP is set to false.
show configuration Network.DefaultGatewayNetwork.DefaultGatewayDefault gateway for IP Routing. Note: Enabled only when Network.DHCP is set to false.
show configuration Network.HostNameNetwork.HostNameHost name of device
show configuration Network.DomainNameNetwork.DomainNameNetwork domain name
show configuration Network.DNS1Network.DNS1Primary DNS server IP address. Note: Enabled only when Network.DHCP is set to false.
show configuration Network.DNS2Network.DNS2Secondary DNS server IP address. Note: Enabled only when Network.DHCP is set to false.
show configuration Network.Ethernet.SpeedNetwork.Ethernet.SpeedEthernet speed
show configuration Network.Ethernet.DuplexNetwork.Ethernet.DuplexEthernet duplex
show configuration Network.Ethernet.RxPacketsNetwork.Ethernet.RxPacketsTotal packets received
show configuration Network.Ethernet.TxPacketsNetwork.Ethernet.TxPacketsTotal packets transmitted
show configuration Network.Dhcp.ServerNetwork.Dhcp.ServerDHCP server IP address
show configuration Network.Dhcp.VlanIdOptionTagNetwork.Dhcp.VlanIdOptionTagDHCP option tag of VLAN ID. Note: Enabled only when Network.DHCP is set to true.
show configuration Network.Ntp.Server1Network.Ntp.Server1Primary NTP server IP address
show configuration Network.Ntp.Server2Network.Ntp.Server2Secondary NTP server IP address
show configuration Network.Vlan.ManualVlanIdNetwork.Vlan.ManualVlanIdUser configured VLAN ID. When DHCP does not provide the VLAN ID, this value is used.
show configuration Network.Vlan.ActiveVlanIdNetwork.Vlan.ActiveVlanIdVLAN ID in use. When provided over DHCP, this parameter is used.
show configuration Network.QoS.DscpVoiceNetwork.QoS.DscpVoiceNetwork layer DSCP priority of voice channels
show configuration Network.QoS.DscpSignalingNetwork.QoS.DscpSignalingNetwork layer DSCP priority of signaling channels
show configuration Network.QoS.CosVoiceNetwork.QoS.CosVoiceLink layer priority of voice channels
show configuration Network.QoS.CosSignalingNetwork.QoS.CosSignalingLink layer priority of signaling channels
show configuration Network.Services.SSHEnabledNetwork.Services.SSHEnabledEnable SSH server
show configuration Network.Services.WebServerModeNetwork.Services.WebServerModeEnable web server
show configuration Network.Status.LinkStateNetwork.Status.LinkStateLink layer state
show configuration Network.Status.SpeedDuplexMatchNetwork.Status.SpeedDuplexMatchLLDP Ethernet port speed/duplex match
show configuration Network.Status.LldpNeighborNetwork.Status.LldpNeighborNumber of LLDP neighbors
show configuration Network.Status.VoiceVlanStatusNetwork.Status.VoiceVlanStatusVoice VLAN status
show configuration Network.Status.DhcpNetwork.Status.DhcpDHCP Status
show configuration Network.Status.NtpStatusNetwork.Status.NtpStatusNTP servers are set by
show configuration Network.Status.AddressConflictNetwork.Status.AddressConflictIP address conflict
show configuration Network.Status.GatewayStatusNetwork.Status.GatewayStatusDefault gateway status
show configuration Network.Status.DnsStatusNetwork.Status.DnsStatusDNS server status
show configuration Network.Status.HostnameResolvableNetwork.Status.HostnameResolvableDevice hostname resolvable on DNS server
show configuration Provisioning.Configuration.DefaultConfigProvisioning.Configuration.DefaultConfigDefault master configuration file
show configuration Provisioning.Configuration.MacConfigProvisioning.Configuration.MacConfigMAC Address master configuration file
show configuration Provisioning.Configuration.FilesProvisioning.Configuration.FilesList of configuration files
show configuration Provisioning.Configuration.ImageFileProvisioning.Configuration.ImageFileDVCP software image file
show configuration Provisioning.Server.StaticProvisioning.Server.StaticFlag to determine whether to enable static configuration of the provisioning server address. If true, the provisioning server is accessible through Provisioning.Server.Address. If false, the provisioning server information is passed to the phone over DHCP in option 66.
show configuration Provisioning.Server.TypeProvisioning.Server.TypeProvisioning server type
show configuration Provisioning.Server.AddressProvisioning.Server.AddressProvisioning server address. Note: Enabled only when Provisioning.Server.Static is set to true.
show configuration Provisioning.Server.UsernameProvisioning.Server.UsernameProvisioning server login name. For Provisioning.Server.Type=ftp, this is the user name for logging into the FTP server.
show configuration Provisioning.Server.PasswordProvisioning.Server.PasswordProvisioning server login password. For Provisioning.Server.Type=ftp, this is the password for logging into the FTP server.
show configuration Provisioning.Server.UploadDirProvisioning.Server.UploadDirDirectory on provisioning server for uploaded files
show configuration Provisioning.Scheduled.EnableProvisioning.Scheduled.EnableFlag to determine if scheduled provisioning is enabled
show configuration Provisioning.Scheduled.StartTimeProvisioning.Scheduled.StartTimeScheduled reprovisioning start time
show configuration Provisioning.Scheduled.DurationProvisioning.Scheduled.DurationScheduled reprovisioning interval duration, reprovisioning will happen randomly within this time frame from the start time
show configuration Provisioning.Software.AppVersionProvisioning.Software.AppVersionApp software version
show configuration Provisioning.Software.VppVersionProvisioning.Software.VppVersionVoice Processing Platform version
show configuration Provisioning.Software.AcmeVersionProvisioning.Software.AcmeVersionACME Module Version
show configuration Sip.Account.DisplayNameSip.Account.DisplayNameSIP user display name
show configuration Sip.Account.UserNameSip.Account.UserNameExtension Number/Address (also SIP user name)
show configuration Sip.Account.DisplayNumberSip.Account.DisplayNumberThis is the number that will be displayed on the home screen, if not configured then extension number will be displayed instead.
show configuration Sip.Account.TransportTypeSip.Account.TransportTypePreferred transport to communicate with PBX Server
show configuration Sip.Account.SelfPortSip.Account.SelfPortBind port used for SIP transport. TLS port will be default to UDP/TCP port incremented by 1
show configuration Sip.Pbx.DomainSip.Pbx.DomainSIP domain name
show configuration Sip.Pbx.OutboundProxy1Sip.Pbx.OutboundProxy1Primary SIP server address
show configuration Sip.Pbx.OutboundProxy1PortSip.Pbx.OutboundProxy1PortPrimary SIP server port
show configuration Sip.Pbx.OutboundProxy2Sip.Pbx.OutboundProxy2Secondary SIP server address
show configuration Sip.Pbx.OutboundProxy2PortSip.Pbx.OutboundProxy2PortSecondary SIP server port
show configuration Sip.Pbx.SipUriSchemeSip.Pbx.SipUriSchemeSIP URI Scheme. Possible values are true - sip and false - sips
show configuration Sip.Pbx.OnlyAcceptCallServerEventsSip.Pbx.OnlyAcceptCallServerEventsWhether the device will only accept SIP events from the Call Server
show configuration Sip.Pbx.RegistrationTimeoutSip.Pbx.RegistrationTimeoutSIP server registration timeout (seconds)
show configuration Sip.Pbx.CodecsSip.Pbx.CodecsPBX Codec list
show configuration Sip.Pbx.InBandDTMFSip.Pbx.InBandDTMFIn-band DTMF
show configuration Sip.Credential.NameSip.Credential.NameUser credential name
show configuration Sip.Credential.PasswordSip.Credential.PasswordUser credential password
show configuration Sip.Credential.RealmSip.Credential.RealmServer realm
show configuration Dvms.Location.CountryCodeDvms.Location.CountryCodeDefault country code for dial-out
show configuration Dvms.InactiveTalkerTimeoutDvms.InactiveTalkerTimeoutTimeout to removing the active talker flag from the talker's list
show configuration Dvms.Server.SIPRegistrationRequiredDvms.Server.SIPRegistrationRequiredFlag to determine if SIP registration required with Dolby Voice Conferencing Server
show configuration Dvms.Server.AddressDvms.Server.AddressDolby Voice server IP address or domain
show configuration Dvms.Server.HeadersDvms.Server.HeadersSIP custom conference headers
show configuration Dvms.Server.CodecDvms.Server.CodecDolby Voice Conference Codec.
show configuration Dvms.Server.RegistrationPINDvms.Server.RegistrationPINDolby Voice Registration PIN
show configuration Dvms.Proxy.AddressDvms.Proxy.AddressDolby Voice Conference Proxy Address
show configuration Dvms.Proxy.PortDvms.Proxy.PortDolby Voice Conference Proxy Port
show configuration Dvms.Proxy.UserDvms.Proxy.UserDolby Voice Conference Proxy User
show configuration Dvms.Proxy.PasswordDvms.Proxy.PasswordDolby Voice Conference Proxy Password
show configuration Directory.Ldap.URIListDirectory.Ldap.URIListComma-separated list of LDAP server URIs (ldap://xxx[,ldap://yyy])
show configuration Directory.Ldap.LoginNameDirectory.Ldap.LoginNameName used to login into the LDAP server(s)
show configuration Directory.Ldap.PasswordDirectory.Ldap.PasswordPassword used to login into the LDAP server(s)
show configuration Directory.Ldap.SecureConnectionDirectory.Ldap.SecureConnectionFlag to determine whether to use a secure connection to the LDAP server
show configuration Directory.Ldap.BaseDNDirectory.Ldap.BaseDNBase domain name for the search. For example, "dc=dolby,dc=com"
show configuration Directory.Ldap.SearchFilterDirectory.Ldap.SearchFilterLDAP search filter, where %1 is a placeholder for the search keyword
show configuration Directory.Ldap.SearchScopeDirectory.Ldap.SearchScopeSearch depth, where 0=base, 1=one level down, and 2=sub-tree
show configuration Directory.Ldap.SearchTimeoutDirectory.Ldap.SearchTimeoutSearch timeout (seconds)
show configuration Directory.Ldap.SearchLimitDirectory.Ldap.SearchLimitMaximum number of search results
show configuration Directory.Ldap.AttrFirstNameDirectory.Ldap.AttrFirstNameName of the attribute corresponding to the first name in the LDAP schema
show configuration Directory.Ldap.AttrLastNameDirectory.Ldap.AttrLastNameName of the attribute corresponding to the last name in the LDAP schema
show configuration Directory.Ldap.AttrNumberDirectory.Ldap.AttrNumberName of the attribute corresponding to the phone number in the LDAP schema
show configuration Directory.Ldap.AttrUUIDDirectory.Ldap.AttrUUIDName of the attribute corresponding to the unique user ID in the LDAP schema
show configuration Directory.Ldap.AttrMailDirectory.Ldap.AttrMailName of the attribute corresponding to the e-mail address in the LDAP schema
show configuration Logging.Upload.EnableLogging.Upload.EnableFlag to determine if upload of log files is enabled
show configuration Logging.Upload.IntervalLogging.Upload.IntervalInterval between logs uploads in minutes
show configuration Logging.RemoteSyslog.EnableLogging.RemoteSyslog.EnableFlag to determine if logging to syslog server enabled if syslog server is configured
show configuration Logging.RemoteSyslog.AddressLogging.RemoteSyslog.AddressSyslog server IP address
show configuration Logging.Console.EnableOutputLogging.Console.EnableOutputFlag to determine if sending of logging messages to active console(s) is enabled
show configuration Logging.Level.EvsLogging.Level.EvsEVS (Event Service) is an internal communication dispatch service that allows software modules to talk to each other. In the log file, the module name is EVS.
show configuration Logging.Level.ACMELogging.Level.ACMEACME SDK is a 3rd party library that handles tunneling connection with the conferencing service. In the log file, the module name is ACME.
show configuration Logging.Level.SipLogging.Level.SipSIP Communication module, which handles all telephony and conferencing service session negotiation signaling. In the log file, the module name is SIP.
show configuration Logging.Level.CcapiLogging.Level.CcapiConference Control API, which handles conferencing service signaling, such as roster list, active speaker, device registration, etc. In the log file, the module name is CCAPI.
show configuration Logging.Level.ApiLogging.Level.ApiAPS API is an application programming interface that is used by the Embedded UI and Web UI. In the log file, the module name is API.
show configuration Logging.Level.CfgLogging.Level.CfgConfiguration manager, handles the storage, dispatch of the configuration parameters. In the log file, the module name is CFG.
show configuration Logging.Level.AuthLogging.Level.AuthAuthentication module handles user login from the Web UI as well as the SSH shell. In the log file, the module name is AUTH.
show configuration Logging.Level.WebLogging.Level.WebWeb FastCGI module handles the device Web UI requests for device control and diagnostics. In the log file, the module name is WEB.
show configuration Logging.Level.LdpLogging.Level.LdpLDAP (Lightweight Directory Access Protocol) handles the search request to the corporate LDAP server. In the log file, the module name is LDP.
show configuration Logging.Level.NetLogging.Level.NetNetwork service module handles network configuration, such as VLAN, DHCP, LLDP, etc. In the log file the module name is NET.
show configuration Logging.Level.PvsLogging.Level.PvsProvisioning service module handles device interactions with the Provisioning Server, the Provisioning Server is a centralized file server that helps to bulk configure the devices and collect logs. In the log file, the module name is PVS.
show configuration Logging.Level.ShlLogging.Level.ShlShell service handles the SSH shell. In the log file, the module name is SHL.
show configuration Logging.Level.UpdLogging.Level.UpdUpdate service handles the software upgrade on the device. In the log file, the module name is UPD.
show configuration Logging.Level.DevLogging.Level.DevDevice Manager handles the device hardware related tasks. In the log file, the module name is DEV.
show configuration Logging.Level.CallLogLogging.Level.CallLogCall Log handles the recent call service, records the calls placed, received and missed on the device. In the log file, the module name is CDR.
show configuration Logging.Level.UILogging.Level.UIEmbedded UI User interface module. In the log file, the module name is UI.
show configuration Logging.Level.SecurityLogging.Level.SecuritySecurity module handles the certificate management of the device. In the log file, the module name is SEC.
show configuration Logging.Level.CdspLogging.Level.CdspDSP (Digital Signal Processor) handles audio processing. In the log file, the module name is SEC.
show configuration Logging.Audio.ModeLogging.Audio.ModeAudio module logging level. Possible options are Disabled, Statistics, Diagnostic)
show configuration Logging.Audio.BufferSizeLogging.Audio.BufferSizeAudio logging buffer size in kB. Possible values range from 4096 to 16384
show configuration Logging.Audio.EchoRefInputEnabledLogging.Audio.EchoRefInputEnabledFlag to determine if logging of echo reference input is enabled
show configuration Logging.Audio.EchoRefOutputEnabledLogging.Audio.EchoRefOutputEnabledFlag to determine if logging of echo reference output is enabled
show configuration Logging.Audio.JitterInputEnabledLogging.Audio.JitterInputEnabledFlag to determine if logging of jitter buffer input is enabled
show configuration Logging.Audio.JitterOutputEnabledLogging.Audio.JitterOutputEnabledFlag to determine if logging of jitter buffer output is enabled
show configuration Device.SerialNumberDevice.SerialNumberDevice serial number
show configuration Device.SetupCompletedDevice.SetupCompletedShows device setup completion status
show configuration Device.ConfigurationErrorsDevice.ConfigurationErrorsShows configuration errors
show configuration Device.BoardRevisionDevice.BoardRevisionHardware Revision ID
show configuration Device.SystemResource.ServicesMemoryUsedDevice.SystemResource.ServicesMemoryUsedServices Mem Usage
show configuration Device.SystemResource.GUIMemoryUsedDevice.SystemResource.GUIMemoryUsedGUI Mem Usage
show configuration Device.SystemResource.OverallMemoryUsedDevice.SystemResource.OverallMemoryUsedOverall Mem Usage
show configuration Device.SystemResource.DSPCPULoadDevice.SystemResource.DSPCPULoadDSP CPU Load
show configuration Device.SystemResource.ServicesCPULoadDevice.SystemResource.ServicesCPULoadServices CPU Load
show configuration Device.SystemResource.OverallCPULoadDevice.SystemResource.OverallCPULoadOverall System CPU Load
show configuration Device.SystemResource.GUICPULoadDevice.SystemResource.GUICPULoadGUI CPU Load
show configuration Device.SystemResource.UserDataPartitionAvailDevice.SystemResource.UserDataPartitionAvailUserdata partition availabble space
show configuration Device.SystemResource.SystemUptimeDevice.SystemResource.SystemUptimeSystem Uptime (seconds)
show configuration Device.SystemResource.SystemBootTimeDevice.SystemResource.SystemBootTimeSystem Boot Time (seconds)
show configuration Device.MacAddressDevice.MacAddressDevice MAC address
show configuration Device.Status.NetworkDevice.Status.NetworkNetwork Status
show configuration Device.Status.SipRegisteredDevice.Status.SipRegisteredSIP Registered Status
show configuration Device.Status.ActiveSipRegistrarDevice.Status.ActiveSipRegistrarAddress of the active registrar
show configuration Device.Status.NTPActiveDevice.Status.NTPActiveNTP Active Status
show configuration Device.Status.BTMeetMeRegisteredDevice.Status.BTMeetMeRegisteredBT MeetMe Registration Status
show configuration Device.Status.LDAPConnectedDevice.Status.LDAPConnectedLDAP Connected Status
show configuration Device.Status.ProvisionSuccessfulDevice.Status.ProvisionSuccessfulProvision Successful Status
show configuration Device.Status.RebootDevice.Status.RebootShows device reboot status
show configuration Authentication.Local.AdminAuthentication.Local.AdminAdministrative password
show configuration Authentication.Local.SessionTimeoutAuthentication.Local.SessionTimeoutDefault session timeout (seconds)
show configuration Authentication.Local.SessionPurgeTimeAuthentication.Local.SessionPurgeTimeThe expired sessions record will be purged from internal sessions list after this many seconds
show authStatusauthStatusShows authentication service status

Table 1.5 upload Shell Commands

CommandParameter(s)Description
upload audiologaudiologUpload audio logs.

Table 1.6 configure Shell Commands

CommandParameter(s)Description
configure Features.OperationModeFeatures.OperationModeDevice operation mode
configure Features.RecentCallsEnabledFeatures.RecentCallsEnabledFlag to determine whether to enable the recent calls feature
configure Features.UserFeedback.EnabledFeatures.UserFeedback.EnabledFlag to determine whether to show the call quality feedback dialog at the end of a call
configure Features.UserFeedback.HotlineFeatures.UserFeedback.HotlineUser feedback hotline number
configure Preferences.DndEnabledPreferences.DndEnabledFlag to determine whether to enable the Do Not Disturb feature
configure Preferences.AutoAnswerEnabledPreferences.AutoAnswerEnabledFlag to determine whether to enable the Auto-Answer feature
configure Preferences.ForwardAllNumberPreferences.ForwardAllNumberNumber where all calls are forwarded to
configure Preferences.ForwardBusyNumberPreferences.ForwardBusyNumberNumber where a call is forwarded when the user is busy
configure Preferences.ForwardNoAnswerNumberPreferences.ForwardNoAnswerNumberNumber where a call is forwarded when the user does not answer the phone
configure Preferences.SpeechVolumePreferences.SpeechVolumeVolume of speaker audio
configure Preferences.RingerVolumePreferences.RingerVolumeVolume of ringer
configure Preferences.BrightnessLevelPreferences.BrightnessLevelBrightness level of backlight
configure Preferences.Localization.TimezonePreferences.Localization.TimezoneTime zone where the device is located. For complete list of possible values, go to http://www.iana.org/time-zones
configure Preferences.Localization.TimeFormatPreferences.Localization.TimeFormatTime Format
configure Preferences.Localization.DateFormatPreferences.Localization.DateFormatDate Format
configure Network.DHCPNetwork.DHCPFlag to determine whether to enable automatic network configuration using DHCP. If true, the phone will come up requesting an IP address from the DHCP server. If false, you will manually configure the IP address.
configure Network.IpAddressNetwork.IpAddressIP address of the phone. Note: Enabled only when Network.DHCP is set to false.
configure Network.SubnetNetwork.SubnetSubnet mask of the network interface. Note: Enabled only when Network.DHCP is set to false.
configure Network.DefaultGatewayNetwork.DefaultGatewayDefault gateway for IP Routing. Note: Enabled only when Network.DHCP is set to false.
configure Network.DomainNameNetwork.DomainNameNetwork domain name
configure Network.DNS1Network.DNS1Primary DNS server IP address. Note: Enabled only when Network.DHCP is set to false.
configure Network.DNS2Network.DNS2Secondary DNS server IP address. Note: Enabled only when Network.DHCP is set to false.
configure Network.Dhcp.VlanIdOptionTagNetwork.Dhcp.VlanIdOptionTagDHCP option tag of VLAN ID. Note: Enabled only when Network.DHCP is set to true.
configure Network.Ntp.Server1Network.Ntp.Server1Primary NTP server IP address
configure Network.Ntp.Server2Network.Ntp.Server2Secondary NTP server IP address
configure Network.Vlan.ManualVlanIdNetwork.Vlan.ManualVlanIdUser configured VLAN ID. When DHCP does not provide the VLAN ID, this value is used.
configure Network.QoS.DscpVoiceNetwork.QoS.DscpVoiceNetwork layer DSCP priority of voice channels
configure Network.QoS.DscpSignalingNetwork.QoS.DscpSignalingNetwork layer DSCP priority of signaling channels
configure Network.QoS.CosVoiceNetwork.QoS.CosVoiceLink layer priority of voice channels
configure Network.QoS.CosSignalingNetwork.QoS.CosSignalingLink layer priority of signaling channels
configure Network.Services.SSHEnabledNetwork.Services.SSHEnabledEnable SSH server
configure Network.Services.WebServerModeNetwork.Services.WebServerModeEnable web server
configure Provisioning.Configuration.ImageFileProvisioning.Configuration.ImageFileDVCP software image file
configure Provisioning.Server.StaticProvisioning.Server.StaticFlag to determine whether to enable static configuration of the provisioning server address. If true, the provisioning server is accessible through Provisioning.Server.Address. If false, the provisioning server information is passed to the phone over DHCP in option 66.
configure Provisioning.Server.TypeProvisioning.Server.TypeProvisioning server type
configure Provisioning.Server.AddressProvisioning.Server.AddressProvisioning server address. Note: Enabled only when Provisioning.Server.Static is set to true.
configure Provisioning.Server.UsernameProvisioning.Server.UsernameProvisioning server login name. For Provisioning.Server.Type=ftp, this is the user name for logging into the FTP server.
configure Provisioning.Server.PasswordProvisioning.Server.PasswordProvisioning server login password. For Provisioning.Server.Type=ftp, this is the password for logging into the FTP server.
configure Provisioning.Server.UploadDirProvisioning.Server.UploadDirDirectory on provisioning server for uploaded files
configure Provisioning.Scheduled.EnableProvisioning.Scheduled.EnableFlag to determine if scheduled provisioning is enabled
configure Provisioning.Scheduled.StartTimeProvisioning.Scheduled.StartTimeScheduled reprovisioning start time
configure Provisioning.Scheduled.DurationProvisioning.Scheduled.DurationScheduled reprovisioning interval duration, reprovisioning will happen randomly within this time frame from the start time
configure Sip.Account.DisplayNameSip.Account.DisplayNameSIP user display name
configure Sip.Account.UserNameSip.Account.UserNameExtension Number/Address (also SIP user name)
configure Sip.Account.DisplayNumberSip.Account.DisplayNumberThis is the number that will be displayed on the home screen, if not configured then extension number will be displayed instead.
configure Sip.Account.TransportTypeSip.Account.TransportTypePreferred transport to communicate with PBX Server
configure Sip.Account.SelfPortSip.Account.SelfPortBind port used for SIP transport. TLS port will be default to UDP/TCP port incremented by 1
configure Sip.Pbx.DomainSip.Pbx.DomainSIP domain name
configure Sip.Pbx.OutboundProxy1Sip.Pbx.OutboundProxy1Primary SIP server address
configure Sip.Pbx.OutboundProxy1PortSip.Pbx.OutboundProxy1PortPrimary SIP server port
configure Sip.Pbx.OutboundProxy2Sip.Pbx.OutboundProxy2Secondary SIP server address
configure Sip.Pbx.OutboundProxy2PortSip.Pbx.OutboundProxy2PortSecondary SIP server port
configure Sip.Pbx.SipUriSchemeSip.Pbx.SipUriSchemeSIP URI Scheme. Possible values are true - sip and false - sips
configure Sip.Pbx.OnlyAcceptCallServerEventsSip.Pbx.OnlyAcceptCallServerEventsWhether the device will only accept SIP events from the Call Server
configure Sip.Pbx.RegistrationTimeoutSip.Pbx.RegistrationTimeoutSIP server registration timeout (seconds)
configure Sip.Pbx.CodecsSip.Pbx.CodecsPBX Codec list
configure Sip.Pbx.InBandDTMFSip.Pbx.InBandDTMFIn-band DTMF
configure Sip.Credential.NameSip.Credential.NameUser credential name
configure Sip.Credential.PasswordSip.Credential.PasswordUser credential password
configure Sip.Credential.RealmSip.Credential.RealmServer realm
configure Dvms.Location.CountryCodeDvms.Location.CountryCodeDefault country code for dial-out
configure Dvms.InactiveTalkerTimeoutDvms.InactiveTalkerTimeoutTimeout to removing the active talker flag from the talker's list
configure Dvms.Server.SIPRegistrationRequiredDvms.Server.SIPRegistrationRequiredFlag to determine if SIP registration required with Dolby Voice Conferencing Server
configure Dvms.Server.AddressDvms.Server.AddressDolby Voice server IP address or domain
configure Dvms.Server.HeadersDvms.Server.HeadersSIP custom conference headers
configure Dvms.Server.CodecDvms.Server.CodecDolby Voice Conference Codec.
configure Dvms.Server.RegistrationPINDvms.Server.RegistrationPINDolby Voice Registration PIN
configure Dvms.Proxy.AddressDvms.Proxy.AddressDolby Voice Conference Proxy Address
configure Dvms.Proxy.PortDvms.Proxy.PortDolby Voice Conference Proxy Port
configure Dvms.Proxy.UserDvms.Proxy.UserDolby Voice Conference Proxy User
configure Dvms.Proxy.PasswordDvms.Proxy.PasswordDolby Voice Conference Proxy Password
configure Directory.Ldap.URIListDirectory.Ldap.URIListComma-separated list of LDAP server URIs (ldap://xxx[,ldap://yyy])
configure Directory.Ldap.LoginNameDirectory.Ldap.LoginNameName used to login into the LDAP server(s)
configure Directory.Ldap.PasswordDirectory.Ldap.PasswordPassword used to login into the LDAP server(s)
configure Directory.Ldap.SecureConnectionDirectory.Ldap.SecureConnectionFlag to determine whether to use a secure connection to the LDAP server
configure Directory.Ldap.BaseDNDirectory.Ldap.BaseDNBase domain name for the search. For example, "dc=dolby,dc=com"
configure Directory.Ldap.SearchFilterDirectory.Ldap.SearchFilterLDAP search filter, where %1 is a placeholder for the search keyword
configure Directory.Ldap.SearchScopeDirectory.Ldap.SearchScopeSearch depth, where 0=base, 1=one level down, and 2=sub-tree
configure Directory.Ldap.SearchTimeoutDirectory.Ldap.SearchTimeoutSearch timeout (seconds)
configure Directory.Ldap.SearchLimitDirectory.Ldap.SearchLimitMaximum number of search results
configure Directory.Ldap.AttrFirstNameDirectory.Ldap.AttrFirstNameName of the attribute corresponding to the first name in the LDAP schema
configure Directory.Ldap.AttrLastNameDirectory.Ldap.AttrLastNameName of the attribute corresponding to the last name in the LDAP schema
configure Directory.Ldap.AttrNumberDirectory.Ldap.AttrNumberName of the attribute corresponding to the phone number in the LDAP schema
configure Directory.Ldap.AttrUUIDDirectory.Ldap.AttrUUIDName of the attribute corresponding to the unique user ID in the LDAP schema
configure Directory.Ldap.AttrMailDirectory.Ldap.AttrMailName of the attribute corresponding to the e-mail address in the LDAP schema
configure Logging.Upload.EnableLogging.Upload.EnableFlag to determine if upload of log files is enabled
configure Logging.Upload.IntervalLogging.Upload.IntervalInterval between logs uploads in minutes
configure Logging.RemoteSyslog.EnableLogging.RemoteSyslog.EnableFlag to determine if logging to syslog server enabled if syslog server is configured
configure Logging.RemoteSyslog.AddressLogging.RemoteSyslog.AddressSyslog server IP address
configure Logging.Console.EnableOutputLogging.Console.EnableOutputFlag to determine if sending of logging messages to active console(s) is enabled
configure Logging.Level.EvsLogging.Level.EvsEVS (Event Service) is an internal communication dispatch service that allows software modules to talk to each other. In the log file, the module name is EVS.
configure Logging.Level.ACMELogging.Level.ACMEACME SDK is a 3rd party library that handles tunneling connection with the conferencing service. In the log file, the module name is ACME.
configure Logging.Level.SipLogging.Level.SipSIP Communication module, which handles all telephony and conferencing service session negotiation signaling. In the log file, the module name is SIP.
configure Logging.Level.CcapiLogging.Level.CcapiConference Control API, which handles conferencing service signaling, such as roster list, active speaker, device registration, etc. In the log file, the module name is CCAPI.
configure Logging.Level.ApiLogging.Level.ApiAPS API is an application programming interface that is used by the Embedded UI and Web UI. In the log file, the module name is API.
configure Logging.Level.CfgLogging.Level.CfgConfiguration manager, handles the storage, dispatch of the configuration parameters. In the log file, the module name is CFG.
configure Logging.Level.AuthLogging.Level.AuthAuthentication module handles user login from the Web UI as well as the SSH shell. In the log file, the module name is AUTH.
configure Logging.Level.WebLogging.Level.WebWeb FastCGI module handles the device Web UI requests for device control and diagnostics. In the log file, the module name is WEB.
configure Logging.Level.LdpLogging.Level.LdpLDAP (Lightweight Directory Access Protocol) handles the search request to the corporate LDAP server. In the log file, the module name is LDP.
configure Logging.Level.NetLogging.Level.NetNetwork service module handles network configuration, such as VLAN, DHCP, LLDP, etc. In the log file the module name is NET.
configure Logging.Level.PvsLogging.Level.PvsProvisioning service module handles device interactions with the Provisioning Server, the Provisioning Server is a centralized file server that helps to bulk configure the devices and collect logs. In the log file, the module name is PVS.
configure Logging.Level.ShlLogging.Level.ShlShell service handles the SSH shell. In the log file, the module name is SHL.
configure Logging.Level.UpdLogging.Level.UpdUpdate service handles the software upgrade on the device. In the log file, the module name is UPD.
configure Logging.Level.DevLogging.Level.DevDevice Manager handles the device hardware related tasks. In the log file, the module name is DEV.
configure Logging.Level.CallLogLogging.Level.CallLogCall Log handles the recent call service, records the calls placed, received and missed on the device. In the log file, the module name is CDR.
configure Logging.Level.UILogging.Level.UIEmbedded UI User interface module. In the log file, the module name is UI.
configure Logging.Level.SecurityLogging.Level.SecuritySecurity module handles the certificate management of the device. In the log file, the module name is SEC.
configure Logging.Level.CdspLogging.Level.CdspDSP (Digital Signal Processor) handles audio processing. In the log file, the module name is SEC.
configure Logging.Audio.ModeLogging.Audio.ModeAudio module logging level. Possible options are Disabled, Statistics, Diagnostic)
configure Logging.Audio.BufferSizeLogging.Audio.BufferSizeAudio logging buffer size in kB. Possible values range from 4096 to 16384
configure Logging.Audio.EchoRefInputEnabledLogging.Audio.EchoRefInputEnabledFlag to determine if logging of echo reference input is enabled
configure Logging.Audio.EchoRefOutputEnabledLogging.Audio.EchoRefOutputEnabledFlag to determine if logging of echo reference output is enabled
configure Logging.Audio.JitterInputEnabledLogging.Audio.JitterInputEnabledFlag to determine if logging of jitter buffer input is enabled
configure Logging.Audio.JitterOutputEnabledLogging.Audio.JitterOutputEnabledFlag to determine if logging of jitter buffer output is enabled
configure Device.SetupCompletedDevice.SetupCompletedShows device setup completion status
configure Device.Status.RebootDevice.Status.RebootShows device reboot status
configure Authentication.Local.AdminAuthentication.Local.AdminAdministrative password
configure Authentication.Local.SessionTimeoutAuthentication.Local.SessionTimeoutDefault session timeout (seconds)
configure Authentication.Local.SessionPurgeTimeAuthentication.Local.SessionPurgeTimeThe expired sessions record will be purged from internal sessions list after this many seconds

Table 1.7 clear Shell Commands

CommandParameter(s)Description
clear Features.OperationModeFeatures.OperationModeDevice operation mode
clear Features.RecentCallsEnabledFeatures.RecentCallsEnabledFlag to determine whether to enable the recent calls feature
clear Features.UserFeedback.EnabledFeatures.UserFeedback.EnabledFlag to determine whether to show the call quality feedback dialog at the end of a call
clear Features.UserFeedback.HotlineFeatures.UserFeedback.HotlineUser feedback hotline number
clear Preferences.DndEnabledPreferences.DndEnabledFlag to determine whether to enable the Do Not Disturb feature
clear Preferences.AutoAnswerEnabledPreferences.AutoAnswerEnabledFlag to determine whether to enable the Auto-Answer feature
clear Preferences.ForwardAllNumberPreferences.ForwardAllNumberNumber where all calls are forwarded to
clear Preferences.ForwardBusyNumberPreferences.ForwardBusyNumberNumber where a call is forwarded when the user is busy
clear Preferences.ForwardNoAnswerNumberPreferences.ForwardNoAnswerNumberNumber where a call is forwarded when the user does not answer the phone
clear Preferences.SpeechVolumePreferences.SpeechVolumeVolume of speaker audio
clear Preferences.RingerVolumePreferences.RingerVolumeVolume of ringer
clear Preferences.BrightnessLevelPreferences.BrightnessLevelBrightness level of backlight
clear Preferences.Localization.TimezonePreferences.Localization.TimezoneTime zone where the device is located. For complete list of possible values, go to http://www.iana.org/time-zones
clear Preferences.Localization.TimeFormatPreferences.Localization.TimeFormatTime Format
clear Preferences.Localization.DateFormatPreferences.Localization.DateFormatDate Format
clear Network.DHCPNetwork.DHCPFlag to determine whether to enable automatic network configuration using DHCP. If true, the phone will come up requesting an IP address from the DHCP server. If false, you will manually configure the IP address.
clear Network.IpAddressNetwork.IpAddressIP address of the phone. Note: Enabled only when Network.DHCP is set to false.
clear Network.SubnetNetwork.SubnetSubnet mask of the network interface. Note: Enabled only when Network.DHCP is set to false.
clear Network.DefaultGatewayNetwork.DefaultGatewayDefault gateway for IP Routing. Note: Enabled only when Network.DHCP is set to false.
clear Network.DomainNameNetwork.DomainNameNetwork domain name
clear Network.DNS1Network.DNS1Primary DNS server IP address. Note: Enabled only when Network.DHCP is set to false.
clear Network.DNS2Network.DNS2Secondary DNS server IP address. Note: Enabled only when Network.DHCP is set to false.
clear Network.Dhcp.VlanIdOptionTagNetwork.Dhcp.VlanIdOptionTagDHCP option tag of VLAN ID. Note: Enabled only when Network.DHCP is set to true.
clear Network.Ntp.Server1Network.Ntp.Server1Primary NTP server IP address
clear Network.Ntp.Server2Network.Ntp.Server2Secondary NTP server IP address
clear Network.Vlan.ManualVlanIdNetwork.Vlan.ManualVlanIdUser configured VLAN ID. When DHCP does not provide the VLAN ID, this value is used.
clear Network.QoS.DscpVoiceNetwork.QoS.DscpVoiceNetwork layer DSCP priority of voice channels
clear Network.QoS.DscpSignalingNetwork.QoS.DscpSignalingNetwork layer DSCP priority of signaling channels
clear Network.QoS.CosVoiceNetwork.QoS.CosVoiceLink layer priority of voice channels
clear Network.QoS.CosSignalingNetwork.QoS.CosSignalingLink layer priority of signaling channels
clear Network.Services.SSHEnabledNetwork.Services.SSHEnabledEnable SSH server
clear Network.Services.WebServerModeNetwork.Services.WebServerModeEnable web server
clear Provisioning.Configuration.ImageFileProvisioning.Configuration.ImageFileDVCP software image file
clear Provisioning.Server.StaticProvisioning.Server.StaticFlag to determine whether to enable static configuration of the provisioning server address. If true, the provisioning server is accessible through Provisioning.Server.Address. If false, the provisioning server information is passed to the phone over DHCP in option 66.
clear Provisioning.Server.TypeProvisioning.Server.TypeProvisioning server type
clear Provisioning.Server.AddressProvisioning.Server.AddressProvisioning server address. Note: Enabled only when Provisioning.Server.Static is set to true.
clear Provisioning.Server.UsernameProvisioning.Server.UsernameProvisioning server login name. For Provisioning.Server.Type=ftp, this is the user name for logging into the FTP server.
clear Provisioning.Server.PasswordProvisioning.Server.PasswordProvisioning server login password. For Provisioning.Server.Type=ftp, this is the password for logging into the FTP server.
clear Provisioning.Server.UploadDirProvisioning.Server.UploadDirDirectory on provisioning server for uploaded files
clear Provisioning.Scheduled.EnableProvisioning.Scheduled.EnableFlag to determine if scheduled provisioning is enabled
clear Provisioning.Scheduled.StartTimeProvisioning.Scheduled.StartTimeScheduled reprovisioning start time
clear Provisioning.Scheduled.DurationProvisioning.Scheduled.DurationScheduled reprovisioning interval duration, reprovisioning will happen randomly within this time frame from the start time
clear Sip.Account.DisplayNameSip.Account.DisplayNameSIP user display name
clear Sip.Account.UserNameSip.Account.UserNameExtension Number/Address (also SIP user name)
clear Sip.Account.DisplayNumberSip.Account.DisplayNumberThis is the number that will be displayed on the home screen, if not configured then extension number will be displayed instead.
clear Sip.Account.TransportTypeSip.Account.TransportTypePreferred transport to communicate with PBX Server
clear Sip.Account.SelfPortSip.Account.SelfPortBind port used for SIP transport. TLS port will be default to UDP/TCP port incremented by 1
clear Sip.Pbx.DomainSip.Pbx.DomainSIP domain name
clear Sip.Pbx.OutboundProxy1Sip.Pbx.OutboundProxy1Primary SIP server address
clear Sip.Pbx.OutboundProxy1PortSip.Pbx.OutboundProxy1PortPrimary SIP server port
clear Sip.Pbx.OutboundProxy2Sip.Pbx.OutboundProxy2Secondary SIP server address
clear Sip.Pbx.OutboundProxy2PortSip.Pbx.OutboundProxy2PortSecondary SIP server port
clear Sip.Pbx.SipUriSchemeSip.Pbx.SipUriSchemeSIP URI Scheme. Possible values are true - sip and false - sips
clear Sip.Pbx.OnlyAcceptCallServerEventsSip.Pbx.OnlyAcceptCallServerEventsWhether the device will only accept SIP events from the Call Server
clear Sip.Pbx.RegistrationTimeoutSip.Pbx.RegistrationTimeoutSIP server registration timeout (seconds)
clear Sip.Pbx.CodecsSip.Pbx.CodecsPBX Codec list
clear Sip.Pbx.InBandDTMFSip.Pbx.InBandDTMFIn-band DTMF
clear Sip.Credential.NameSip.Credential.NameUser credential name
clear Sip.Credential.PasswordSip.Credential.PasswordUser credential password
clear Sip.Credential.RealmSip.Credential.RealmServer realm
clear Dvms.Location.CountryCodeDvms.Location.CountryCodeDefault country code for dial-out
clear Dvms.InactiveTalkerTimeoutDvms.InactiveTalkerTimeoutTimeout to removing the active talker flag from the talker's list
clear Dvms.Server.SIPRegistrationRequiredDvms.Server.SIPRegistrationRequiredFlag to determine if SIP registration required with Dolby Voice Conferencing Server
clear Dvms.Server.AddressDvms.Server.AddressDolby Voice server IP address or domain
clear Dvms.Server.HeadersDvms.Server.HeadersSIP custom conference headers
clear Dvms.Server.CodecDvms.Server.CodecDolby Voice Conference Codec.
clear Dvms.Server.RegistrationPINDvms.Server.RegistrationPINDolby Voice Registration PIN
clear Dvms.Proxy.AddressDvms.Proxy.AddressDolby Voice Conference Proxy Address
clear Dvms.Proxy.PortDvms.Proxy.PortDolby Voice Conference Proxy Port
clear Dvms.Proxy.UserDvms.Proxy.UserDolby Voice Conference Proxy User
clear Dvms.Proxy.PasswordDvms.Proxy.PasswordDolby Voice Conference Proxy Password
clear Directory.Ldap.URIListDirectory.Ldap.URIListComma-separated list of LDAP server URIs (ldap://xxx[,ldap://yyy])
clear Directory.Ldap.LoginNameDirectory.Ldap.LoginNameName used to login into the LDAP server(s)
clear Directory.Ldap.PasswordDirectory.Ldap.PasswordPassword used to login into the LDAP server(s)
clear Directory.Ldap.SecureConnectionDirectory.Ldap.SecureConnectionFlag to determine whether to use a secure connection to the LDAP server
clear Directory.Ldap.BaseDNDirectory.Ldap.BaseDNBase domain name for the search. For example, "dc=dolby,dc=com"
clear Directory.Ldap.SearchFilterDirectory.Ldap.SearchFilterLDAP search filter, where %1 is a placeholder for the search keyword
clear Directory.Ldap.SearchScopeDirectory.Ldap.SearchScopeSearch depth, where 0=base, 1=one level down, and 2=sub-tree
clear Directory.Ldap.SearchTimeoutDirectory.Ldap.SearchTimeoutSearch timeout (seconds)
clear Directory.Ldap.SearchLimitDirectory.Ldap.SearchLimitMaximum number of search results
clear Directory.Ldap.AttrFirstNameDirectory.Ldap.AttrFirstNameName of the attribute corresponding to the first name in the LDAP schema
clear Directory.Ldap.AttrLastNameDirectory.Ldap.AttrLastNameName of the attribute corresponding to the last name in the LDAP schema
clear Directory.Ldap.AttrNumberDirectory.Ldap.AttrNumberName of the attribute corresponding to the phone number in the LDAP schema
clear Directory.Ldap.AttrUUIDDirectory.Ldap.AttrUUIDName of the attribute corresponding to the unique user ID in the LDAP schema
clear Directory.Ldap.AttrMailDirectory.Ldap.AttrMailName of the attribute corresponding to the e-mail address in the LDAP schema
clear Logging.Upload.EnableLogging.Upload.EnableFlag to determine if upload of log files is enabled
clear Logging.Upload.IntervalLogging.Upload.IntervalInterval between logs uploads in minutes
clear Logging.RemoteSyslog.EnableLogging.RemoteSyslog.EnableFlag to determine if logging to syslog server enabled if syslog server is configured
clear Logging.RemoteSyslog.AddressLogging.RemoteSyslog.AddressSyslog server IP address
clear Logging.Console.EnableOutputLogging.Console.EnableOutputFlag to determine if sending of logging messages to active console(s) is enabled
clear Logging.Level.EvsLogging.Level.EvsEVS (Event Service) is an internal communication dispatch service that allows software modules to talk to each other. In the log file, the module name is EVS.
clear Logging.Level.ACMELogging.Level.ACMEACME SDK is a 3rd party library that handles tunneling connection with the conferencing service. In the log file, the module name is ACME.
clear Logging.Level.SipLogging.Level.SipSIP Communication module, which handles all telephony and conferencing service session negotiation signaling. In the log file, the module name is SIP.
clear Logging.Level.CcapiLogging.Level.CcapiConference Control API, which handles conferencing service signaling, such as roster list, active speaker, device registration, etc. In the log file, the module name is CCAPI.
clear Logging.Level.ApiLogging.Level.ApiAPS API is an application programming interface that is used by the Embedded UI and Web UI. In the log file, the module name is API.
clear Logging.Level.CfgLogging.Level.CfgConfiguration manager, handles the storage, dispatch of the configuration parameters. In the log file, the module name is CFG.
clear Logging.Level.AuthLogging.Level.AuthAuthentication module handles user login from the Web UI as well as the SSH shell. In the log file, the module name is AUTH.
clear Logging.Level.WebLogging.Level.WebWeb FastCGI module handles the device Web UI requests for device control and diagnostics. In the log file, the module name is WEB.
clear Logging.Level.LdpLogging.Level.LdpLDAP (Lightweight Directory Access Protocol) handles the search request to the corporate LDAP server. In the log file, the module name is LDP.
clear Logging.Level.NetLogging.Level.NetNetwork service module handles network configuration, such as VLAN, DHCP, LLDP, etc. In the log file the module name is NET.
clear Logging.Level.PvsLogging.Level.PvsProvisioning service module handles device interactions with the Provisioning Server, the Provisioning Server is a centralized file server that helps to bulk configure the devices and collect logs. In the log file, the module name is PVS.
clear Logging.Level.ShlLogging.Level.ShlShell service handles the SSH shell. In the log file, the module name is SHL.
clear Logging.Level.UpdLogging.Level.UpdUpdate service handles the software upgrade on the device. In the log file, the module name is UPD.
clear Logging.Level.DevLogging.Level.DevDevice Manager handles the device hardware related tasks. In the log file, the module name is DEV.
clear Logging.Level.CallLogLogging.Level.CallLogCall Log handles the recent call service, records the calls placed, received and missed on the device. In the log file, the module name is CDR.
clear Logging.Level.UILogging.Level.UIEmbedded UI User interface module. In the log file, the module name is UI.
clear Logging.Level.SecurityLogging.Level.SecuritySecurity module handles the certificate management of the device. In the log file, the module name is SEC.
clear Logging.Level.CdspLogging.Level.CdspDSP (Digital Signal Processor) handles audio processing. In the log file, the module name is SEC.
clear Logging.Audio.ModeLogging.Audio.ModeAudio module logging level. Possible options are Disabled, Statistics, Diagnostic)
clear Logging.Audio.BufferSizeLogging.Audio.BufferSizeAudio logging buffer size in kB. Possible values range from 4096 to 16384
clear Logging.Audio.EchoRefInputEnabledLogging.Audio.EchoRefInputEnabledFlag to determine if logging of echo reference input is enabled
clear Logging.Audio.EchoRefOutputEnabledLogging.Audio.EchoRefOutputEnabledFlag to determine if logging of echo reference output is enabled
clear Logging.Audio.JitterInputEnabledLogging.Audio.JitterInputEnabledFlag to determine if logging of jitter buffer input is enabled
clear Logging.Audio.JitterOutputEnabledLogging.Audio.JitterOutputEnabledFlag to determine if logging of jitter buffer output is enabled
clear Device.SetupCompletedDevice.SetupCompletedShows device setup completion status
clear Device.Status.RebootDevice.Status.RebootShows device reboot status
clear Authentication.Local.AdminAuthentication.Local.AdminAdministrative password
clear Authentication.Local.SessionTimeoutAuthentication.Local.SessionTimeoutDefault session timeout (seconds)
clear Authentication.Local.SessionPurgeTimeAuthentication.Local.SessionPurgeTimeThe expired sessions record will be purged from internal sessions list after this many seconds